View M220Z3-L03_6978097.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 1 / 25 version 0.0 tft lcd tentative specification model no.: M220Z3-L03 o?y u@ ?f?? |a ?2? 2008-05-22 15:14:33 cst pmmd ii director kevin_wu( d?f? /56520/54894) director accept customer : a pproved by : note : www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 2 / 25 version 0.0 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 5 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 7 3. 1.1 tft lcd module 3.1.2 vcc power dip condition: 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 tft lcd module 5.2 lvds data mapping table 5.3 backlight unit 5.4 color data input assignment 6. interface timing ------------------------------------------------------- 15 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 17 7.1 test conditions 7.2 optical specifications 8. packaging ------------------------------------------------------- 20 8.1 packing specifications 8.2 packing method 9. definition of labels ------------------------------------------------------- 23 9.1 cmo module label 10. precautions ------------------------------------------------------- 24 10.1 assembly and handling precautions 10.2 safety precautions 11. mechanical characteristics ------------------------------------------------------- 25 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 3 / 25 version 0.0 revision history version date section description ver 0.0 mar,04?08 all M220Z3-L03 specifications was first issued ?c www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 4 / 25 version 0.0 1. general description 1.1 overview the M220Z3-L03 model is a 22 inch wide tft-lcd module with a 4 led light-bar backlight unit and a 30-pin 2ch-lvds interface. this module supports 1680 x 1050 wsxga + (16:10 wide screen) mode and displays up to 16.7 millions colors. the converte r module for the backlight unit is built in. 1.2 features - super wide viewing angle - high contrast ratio - fast response time - wsxga + (1680 x 1050 pixels) resolution - de (data enable) only mode - lvds (low voltage differential signaling) interface - white led backlight unit - low power consumption 1.3 application - workstation & desktop monitor - display terminals for av application 1.4 general specificati0ns item specification unit note diagonal size 558.68 mm active area 473.76x296.1 mm bezel opening area 477.7 (h) x 300.1 (v) mm (1) driver element a-si tft active matrix - - pixel number 1680 x r.g.b. x 1050 pixel - pixel pitch 0.282(h) x 0.282(v) mm - pixel arrangement rgb vertical stripe - - display colors 16.7 millions color - transmissive mode normally white - - surface treatment hard coating (3h), ag (haze 25%) - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 493.2 493.7 494.2 mm vertical(v) 319.6 320.1 320.6 mm module size depth(d) 13 13.5 14 mm (1) weight 1850 1900 g i/f connector mounting position the mounting inclination of the connector makes the screen center within 0.5 mm as the horizontal. note (1) please refer to the attached drawings for mo re information of front and back outline dimensions. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 5 / 25 version 0.0 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 50 g (3), (5) vibration (non-operating) v nop - 1 g (4), (5) lcd cell life time l cell 50,000 - hrs mtbf based note (1) temperature and relative humidity range is shown in the figure below. (a) 90% rh max. (ta ?? 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel surface should be 0 oc min. and 60 oc max. note (3) 11 ms, half-sine wave, 1 time for x, y, z. note (4) 10 ~ 300 hz, sweep rate 10 min / cycle , 30 min for x,y,z axis note (5) upon the vibration and shock tests, the fi xture used to hold the module must be firm and rigid enough to prevent the module from twisting or bending by the fixture. storage range relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 80 40 60 20 10 90 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 6 / 25 version 0.0 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +5.5 v (1) 2.2.2 backlight unit value unit note item min. typ max. led converter input voltage - (12) v dc led converter input current (1.4) a dc (1), (2) note (1) permanent damage might occur if the module is operated at conditions exceeding the maximum values. note (2) specified values are for led (refer to 3.2 for further information). www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 7 / 25 version 0.0 3. electrical characteristics 3.1.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 4.5 5.0 5.5 v - ripple voltage v rp - -- 250 mv - rush current i rush - -- 3 a (2) white - 630 819 ma (3)a black - 1170 1521 ma (3)b power supply current f v = 75hz, vcc=4.5v lcc - 1330 1729 ma (4) lvds differential input voltage vid 100 - 600 mv lvds common input voltage vic -- 1.2 -- v note (1) the module is recommended to operate within specification ranges listed above for normal function. note (2) measurement conditions: vcc rising time is 470 s 470 s +5.0v gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +5.0v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 8 / 25 version 0.0 note (3) the specified power supply current is under the conditions at vcc = 5.0 v, ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the specified power supply current is under the conditions at vcc = 4.5 v, ta = 25 2 oc, f v = 75 hz, whereas a power dissipation check patte rn (black pattern) below is displayed. active area a. white pattern active area b. black pattern active area black pattern www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 9 / 25 version 0.0 3.1.2 vcc power dip condition: dip condition: ms td v vcc v 20 , 5 . 4 0 . 4 3.2 backlight unit value parameter symbol min. typ. max. unit note (led converter input voltage) v l (12) v dc (duty 100%) (led converter input current) i l (1.4) a dc (duty 100%) enable en (0.5) (3.3) v dc power on :3.3v,typ. power off :0.5v, typ (3.3) v dc square wave brightness control pwmin (1) khz (led light bar input voltage) v led (33) v dc (1) (led light bar input current) i led (120) ma dc (1) (power consumption) p l (16.8) w (2) (led life time) l led (20000) hrs (3) note (1) led current is measur ed by utilizing a high frequency current meter as shown below: note (2) p l = i l ?? v l note (3) the lifetime of led is defined as the time w hen it continues to operate under the conditions at ta = 2 5 ? 2 o c and i = 20 ma(per ea) until one of the following events occurs: (a) when the brightness becomes ?? 50% of its original value. vcc 4.5v 4.0v td 8 power supply pwm signal generator led converter led backlight module v l, i l gnd pwmin v led i led x4 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 10 / 25 version 0.0 4. block diagram 4.1 tft lcd module 4.2 backlight unit tft lcd panel (1680x3x1050) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage input connector (starconn 093g30-b0001a) gnd v l vcc rxo0(+/-) rxo1(+/-) rxo2(+/-) rxo3(+/-) rxoc(+/-) rxe0(+/-) rxe1(+/-) rxe2(+/-) rxe3(+/-) rxec(+/-) converter connector ( aces 91208 ) led li g ht ba r led li g ht ba r led converter v led i led v led i led v led i led v led i led gnd pwmin en www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 11 / 25 version 0.0 5. input terminal pin assignment 5.1 tft lcd module pin name description 1 rxo0- negative lvds differential data input. channel o0 (odd) 2 rxo0+ positive lvds differential data input. channel o0 (odd) 3 rxo1- negative lvds differential data input. channel o1 (odd) 4 rxo1+ positive lvds differential data input. channel o1 (odd) 5 rxo2- negative lvds differential data input. channel o2 (odd) 6 rxo2+ positive lvds differential data input. channel o2 (odd) 7 gnd ground 8 rxoc- negative lvds differential clock input. (odd) 9 rxoc+ positive lvds differential clock input. (odd) 10 rxo3- negative lvds differential data input. channel o3(odd) 11 rxo3+ positive lvds differential data input. channel o3 (odd) 12 rxe0- negative lvds differential data input. channel e0 (even) 13 rxe0+ positive lvds differential data input. channel e0 (even) 14 gnd ground 15 rxe1- negative lvds differential data input. channel e1 (even) 16 rxe1+ positive lvds differential data input. channel e1 (even) 17 gnd ground 18 rxe2- negative lvds differential data input. channel e2 (even) 19 rxe2+ positive lvds differential data input. channel e2 (even) 20 rxec- negative lvds differential clock input. (even) 21 rxec+ positive lvds differential clock input. (even) 22 rxe3- negative lvds differential data input. channel e3 (even) 23 rxe3+ positive lvds differential data input. channel e3 (even) 24 gnd ground 25 nc not connection, this pin should be open. 26 nc not connection, this pin should be open. 27 nc not connection, this pin should be open. 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply note (1) connector part no.: 093g30-b0001a(starc onn) or fi-x30ssl-hf( jae) or equivalent. note (2) mating connector part no .:fi-x30h ; fi-x30c* ; fi-x30m* ; fi-x30hl(-t),fi-x30c*l(-t) [jae] note (3) the first pixel is odd. note (4) input signal of even and odd clock should be the same timing. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 12 / 25 version 0.0 5.2 lvds data mapping table sellvds = low or open lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel e0 data order eg0 er5 er4 er3 er2 er1 er0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel e1 data order eb1 eb0 eg5 eg4 eg3 eg2 eg1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel e2 data order de na na eb5 eb4 eb3 eb2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel e3 data order na eb7 eb6 eg7 eg6 er7 er6 lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel o0 data order og0 or5 or4 or3 or2 or1 or0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel o1 data order ob1 ob0 og5 og4 og3 og2 og1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel o2 data order de na na ob5 ob4 ob3 ob2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel o3 data order na ob7 ob6 og7 og6 or7 or6 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 13 / 25 version 0.0 5.3 converter specification 5.3.1 connector type input connector type: aces 91208 output connector: aces 91500-01201 5.3.2 input connecto r pin assignment input connector pin assignment: input connector aces 91208 comments pin function 1 v l input voltage power supply + (12v.typ) 2 v l input voltage power supply + (12v.typ) 3 v l input voltage power supply + (12v.typ) 4 v l input voltage power supply + (12v.typ) 5 gnd ground 6 gnd ground 7 gnd ground 8 gnd ground 9 pwmin brightness control (pwm signal input, 1khz. typ, active-low) 10 en enable signal (power of : 3.3v.typ, power off : 0.5v.typ) www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 14 / 25 version 0.0 5.4 color data input assignment the brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 15 / 25 version 0.0 t h t c dclk t hd t vd t v de de data t vb t hb 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note frequency fc 50 59.5 82 mhz - period tc 13.4 16.8 - ns high time tch - 4/7 - tc - lvds clock low time tcl - 3/7 - tc - setup time tlvs 600 - - ps - lvds data hold time tlvh 600 - - ps - frame rate fr 50 60 76 hz tv=tvd+tvb total tv 1060 1080 1195 th - display tvd 1050 1050 1050 th - vertical active display term blank tvb tv-tvd 30 tv-tvd th - total th 890 920 1000 tc th=thd+thb display thd 840 840 840 tc - horizontal active display term blank thb th-thd 80 th-thd tc - note ?g (1) because this module is operated by de onl y mode, hsync and vsync input signals should be set to low logic level or ground. otherwise, this module would operate abnormally. input signal timing diagram www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 16 / 25 version 0.0 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd module, the power on/off sequence should follow the conditions shown in the following diagram. timing specifications: 0.5< t1 ?? 10 msec 0 < t2 ?? 50 msec 0 < t3 ?? 50 msec t4 ? 500 msec t5 ? 450 msec t6 ? 90 msec - power supply for lcd, vcc - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 17 / 25 version 0.0 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 5.0 v input signal according to typical val ue in "3. electrical characteristics" (led light bar input voltage) v led (33) v dc (led light bar input current) i led (120) ma dc 7.2 optical specifications the relative measurement methods of optical characte ristics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (6). item symbol condition min. typ. max. unit note rx (0.664) red ry (0.320) gx (0.201) green gy (0.673) bx (0.153) blue by (0.086) wx 0.313 color chromaticity white wy x =0 , y =0 cs-1000t r=g=b=255 grayscale typ (?0.05) 0.329 typ (+0.05) (1), (5) center luminance of white l c (240) (280) --- cd/m 2 (4), (5) contrast ratio cr 700 1000 --- - (2), (6) t r --- 1.3 2.2 ms response time t f x =0 , y =0 --- 3.7 5.8 ms (3) white variation w x =0 , y =0 --- 1.3 1.42 - (5), (6) x + 75 85 --- horizontal x - 75 85 --- y + 70 80 --- viewing angle vertical y - cr>10 70 80 --- deg. (1), (5) note (1) definition of viewing angle ( x, y): www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 18 / 25 version 0.0 note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (7) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): note (4) definition of luminance of white (l c ): measure the luminance of gray level 255 at center point 100% 90% 10% 0% gray level 255 gray level 0 gray level 255 time t f optical response t r 66.67m 66.67m www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 19 / 25 version 0.0 l c = l (7) l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 255 at 9 points w = maximum [l (1) ~ l (9)] / minimum [l (1) ~ l (9)] gray 0 x cs-1000t 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 lux) usb2000 d w active area vertical line horizontal line : test point x=1 to 9 5 1 3 7 9 d/10 d/2 d/10 w/10 w/2 w/10 x 4 6 8 2 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 20 / 25 version 0.0 8. packaging 8.1 packing specifications (1) 9 lcd modules / 1 box (2) box dimensions: 585(l) x 315 (w) x 440 (h) mm (3) weight: 19.2 kg (9 modules per box) 8.2 packing method (1) carton packing should have no failure in the following reliability test items. figure. 8-1 packing method test item test conditions note vibration ista standard random, frequency range: 1 ? 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation dropping test 1 angle, 3 edge, 6 face, 60cm non operation www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 21 / 25 version 0.0 9. definition of labels for ocean shipping figure. 8-2 packing method for air transport figure. 8-3 packing method www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 22 / 25 version 0.0 9.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: M220Z3-L03 (b) revision: rev. xx, for example: a0, a1? b1, b2? or c1, c2?etc. (c) cmo barcode definition: serial id: xx -xx -x -xx -ymd -l -nnnn code meaning description xx cmo internal use - xx revision cover all the change x cmo internal use - xx cmo internal use - ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31=1, 2, 3, ~, 9, a, b, c, ~, w, x, y, exclude i, o, and u. l product line # line 1=1, line 2=2, line 3=3, ? nnnn serial number manufacturing sequence of product (d) customer?s barcode definition: serial id: cm -22z33 -x -x -x -xx -l -xx -l -ymd -nnnn code meaning description cm supplier code cmo=cm 22z33 model number M220Z3-L03=22z33 x revision code c1=1, c2=2, ?. x source driver ic code x gate driver ic code century=1, cll=2, demos=3, epson=4, fujitsu=5, himax=6, hitachi=7, hynix=8, ldi=9, matsushita=a, nec=b, novatec=c, oki=d, philips=e, renasas=f, samsung=g, sanyo=h, sharp=i, ti=j, topro=k, toshiba=l, windbond=m xx cell location tainan, taiwan=tn l cell line # 1~12=0~c xx module location tainan, taiwan=tn; ningbo china=np l module line # 1~12=0~c ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31=1, 2, 3, ~, 9, a, b, c, ~, t, u, v nnnn serial number by lcd supplier www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 23 / 25 version 0.0 10. precautions 10.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleani ng, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or contacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the performance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slowly. 10.2 safety precautions (1) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) after the module?s end of life, it is not harmful in case of normal operation and storage. www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 24 / 25 version 0.0 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/
doc no.: issued date: mar. 4, 2008 model no.: M220Z3-L03 tentative 25 / 25 version 0.0 www.speclcd.com www.speclcd.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of M220Z3-L03

	To Download M220Z3-L03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .